PUMP TESTING FACILITY

To capture the development of the market as well as to meet customer’s demand. PT Torishima Pump Mfg. Indonesia continuously improve its capabilities in the area of pump production. One of our activities is trying to increase our capability in the production of new generation of hi-tech pumps, in particular pumps for power generations.

PT Torishima Pump Mfg. Indonesia Testing facility will be able to test new generation of pumps, wich have high capacity and pressure.

The Testing Facility comprises two piping system :

  • Low Pressure Facility Test (LPFT)
  • High Pressure Facility Test (HPFT)

The selection of the testing system shall be based on the pressure and the flow capacity of the tested pumps.

The facility is equipped with PLC system and control panel, connected to instrument and control valve installed on the testing facility. Pump testing process can be done automatically and all measurement data can be directly entered into pump data sheet required by customers. It will create a quick and efficient performance test process.

This facility also equipped with Variable Speed Drive (VSD) as to make it possible to test pump powered up to 8 MW.

SPESIFICATION OF PUMP TESTING FACILITY


Pump TypeEnd Suction, Horizontal Split case, Multistage, Vertical Suspended, Submersible, Positive Displacement
Pump SizeHigh Pressure, Big Capacity, up to 200 bars, 15000 m3/hr and 1MW
Pumped MediaWater with ambient temperature and elevated temperature: for oil or process fluid, the testing with water is converted.
Power SupplyLow Voltage and Medium Voltage to 6600 Volt, power source from PLN
Pump SpeedAt rated speed and reduced speed : rated speed up to 1 MW input power and reduced speed for bigger pump driver more than 1 MW
NPSH TestWith closed loop type piping system for the end suction, small to medium size split case and mutistage pumps.

EQUIPMENT OF PUMP TESTING

Piping1 inch (DN25mm) up to 32 inch (dN800mm), pressure up to 200 bars (3000 psi) for high pressure piping up to 8 inch (DN200mm)
ValveButterfly and globe valve 1 inch up to 32 inch; manual and motorized control.
Flow MeterUtramagnetic flow meter & ultrasonic type
Control Panel SystemCentralized operation from control desk : Variable frequency drive, low voltage (up to 500 kW) and Medium Voltage (up to 1 MW)
InstrumentTemperature, Suction & Discharge Pressure, Water level
Water Reservoir200 m3 water pond separated by water gate for suction water level control
Water TankStainless steel pressure tank for close loop system test & NPSH test
Pump PrimingVacuum pump
Bottom BaseFine machined cast iron
Test MotorUp to 500 kW ; for bigger pump use job motor
Measurement ToolsVibration probe & analyser, temperature gun & sensor, sound test, digital tachometer tools.
Over Head CraneUp to 10 tons

PUMP TEST LINES

We have 6 lines testing facility (4 closed loop and 2 open loop system)

PUMP TEST WITH ENGINES

Diesel EngineCustomized piping system for diesel engine pum testing, availabe up on request

LATEST ACTIVITY

WordPress Appliance - Powered by TurnKey Linux